Pretty much the moment I shared the stairs I made for our Lower Town Dollhouse last week, I received 20 messages in shrill voices wanting to know M O A R about the tiny little cat portrait seen at the bottom of the stairs.
I took a few photos while I was making it, so I figured it might be something 4 people might be interested in seeing so here it is!
It was really straight forward; I painted a tiny kitty portrait on some thin, white cardboard, then painted around the portrait using gold paint and cut out the tiny oval. I had some tiny random coloured jewels [that I bought from Dollarama to use on my nails sometimes] that I painted in the same gold and glued them into place.
Then I over-thought how I’d mount the tiny portrait to the wall; do I use a tiny nail? Do I braid some string and secure it to the back of the portrait? Or do I create a tiny picture rail to hang it from? But then I committed to the idea of gluing it in place. If Cora grows out tiny kitty portraits then I’ll just shiv it off the wall. One less thing to over-think!
When I found our Lower Town Dollhouse online secondhand, it was a great price for a reason – because it had no front door and no staircases. This didn’t deter me at all so I bought it knowing I’d one day be able to make some proper little dollhouse stairs for it.
I started by measuring the ceiling height and dividing it by however many steps I wanted [20.3cm ÷ 15 steps = 1.35cm high per riser], and then I measured the depth of the space for the stairs [ie – the hole in the floor] to find the depth of each tread [14cm ÷ 14steps = 1cm deep per step]. I ended up with 1.35cm high steps that were 1cm deep and after a few sketches it looked just right. I tested the measurements using a cardboard template before committing to the real thing, and luckily my second template worked out perfect.
Having to assemble the stairs was one of those things that got more difficult in my head the longer I left it when in reality, as soon as I started, it didn’t take long to make. I used the template to cut 4 copies of the stair silhouette on corrugated cardboard; gluing two sets together to form sturdy supports for each side of the stairs. I wish I took a photo of the assembly stage, but I either forgot or was distracted by a something small yelling at me.
I first glued the risers in place with superglue, followed by gluing each step on top with two layers of cardboard sandwiched with superglue to really toughen them [see: to withstand a sweet and thoughtful yet unrelenting toddler]. I also used masking tape on the back side of the steps to further secure them in place and reinforce the sturdiness.
Again, I didn’t take a photo, but I next used filler to fill in the gaps and toughen the edges. Once that was dry I painted the stairs white and using superglue along the entire right side, along the top step and under the bottom step, I glued the entire staircase in place and I have to say, it is so sturdy that I think Cora could actually stand on it with her real feet and the stairs would survive.
Using wooden coffee stirrers and an existing tiny chair rail, I created [or, attempted to create] a bead board look. I carried the bead board look around the rest of the hallway. It at first looked awful as I was adding it but as soon as I painted it, it looked like a real little room.
Above; the hallway as a work in progress. When I first bought the dollhouse, there wasn’t even a window here. It was just a giant hole. It really was tore up from the floor up [you can get an idea from these photos]. I know it doesn’t look perfect as it is now, but I think it’s an improvement and TBH, because the stairs are glued in place, you can’t get a proper look down the hallway.
It’s quite difficult to see from the only ‘before’ type photo I have below, but you’ll see that the stairs that once were here used to face the other way. For Cora’s sake, I thought it made the most sense for the stairs to be facing toward the back of the dollhouse so Cora could actually use them. Yes, they break several health and safety standards this way, but I don’t think any of the little creatures are part of a union, so I think we’re safe. And let’s not mention the lack of a banister either [purposefully left out until toddler is a bit less smashy].
I have to do an entire second set of stairs for the next floor, so I’ll be following my own set of instructions again soon. But this time around it won’t take nearly as long now that I know what to expect. It’s tiny work but I really do love it so much. To the point where if dollhousing was a career, I’d be trying my best to get into doing that.
I remember the day I decided to paint our thrifted leather chair from The Salvation Army. It was about 35°C when I started, and ended up being around 43°C when I finished. I was a hot mess to put it mildly, but it was so worth it.
Simply put, it’s exactly the same as the day I painted it. No word of a lie. Not a scratch, no peeling, no scuffs, and no fading whatsoever. We’ve used our black leather chair every day since and it hasn’t shown any wear. It’s lasted through a harsh, humid summer and has since experienced a dry, cold winter. While it hasn’t been in the direct 48°C peak this summer nor the -40°C winter winds, inside our apartment has experienced the difference of high humidity then very dry, static-y air.
I think it’s safe to say we’ve put our Fusion Mineral Paint-ed chair through some pretty rigorous testing and has come out the other side perfect. Did I mention we also have a toddler? It has also survived her climbing, curious, energetic hands and thrashing limbs.
I would not hesitate to recommend using Fusion Mineral Paint on leather. Especially something that would get so much physical wear like a piece of furniture. I could not have hoped for it to work out more perfectly. It’s where I blog from the most and even where I’m sitting right now as I type.
DISCLOSURE – while this post is not sponsored, I did receive this paint free of charge from Fusion Mineral Paint in exchange for a blog post. I only work with brands that I like and of course, think you will too. Thank you for supporting the companies that support The Interior DIYer.